This page gives a brief overview of our latest publications.
The digital object identifier (DOI) is a direct link to the online articles.

List of earlier publications

2012


  1.  DOI:10.1541/ieejsms.132.1

  2.  DOI:10.1541/ieejsmas.132.64

  3.  DOI:10.1541/ieejsmas.132.77
  4. Jongho Park, Jacques Fattaccioli, Hiroyuki Fujita, Beomjoon Kim, "Fabrication of Aluminum/Alumina Patterns using Localized Anodization of Aluminum", International Journal of Precision Engineering and Manufacturing, Vol.13, No.5, pp 765-770, 2012.

  5.  DOI:10.1541/ieejsmas.132.96
  6. Marc Stranczl, Edin Sarajlic, Hiroyuki Fujita, Martin A. M. Gijs, and Christophe Yamahata, "High Angular Range Electrostatic Rotary Stepper Micromotors Fabricated with SOI Technology", Journal of Microelectromechanical Systems, Vol.21, No.3, pp.605-620, 2012.
  7. Integration Technology for Heterogeneous Advanced Devices: Basics and Applications
  8. J. Park, S. L. Karsten, S. Nishida, H. Fujita, "Application of a New Microcantilever Biosensor Resonating at Air-liquid Interface for Direct Insulin Detection and Continuous Monitoring of Enzymatic Reactions", Lab on a chip, Vol.12, No.20, pp.4115-4119, 2012.
  9. Momoko Kumemura, Dominique Collard, Satoko Yoshizawa, Bernard Wee, Shoji Takeuchi, Hiroyuki Fujita, "Enzymatic Reaction in Droplets Manipulated with Liquid Dielectrophoresis", ChemPhysChem?, 2012.
     DOI:10.1002/cphc.201200354

  10.  DOI:10.1541/ieejsmas.132.254

  11.  DOI:10.1541/ieejsmas.132.303
  12. L. Jalabert, T. Sato, T. Ishida, H. Fujita, Y. Chalopin, S. Volz, "Ballistic Thermal Conductance of a Lab-in-a-TEM Made Si Nanojunction", Nano Letters, Vol.12, pp.5213-5217, 2012.
  13. Tadashi Ishida, Takaaki Sato, Hiroyuki Fujita, "In-situ Observation of Shear Deformation of Gold Single Real Contact Point at the Nanoscale", Tribology Online, Vol.7, No.3, pp.127-131, 2012.
  14. Momoko Kumemura, Dominique Collard, Satoko Yoshizawa, Bernard Wee, Shoji Takeuchi, Hiroyuki Fujita, "Enzymatic Reaction in Droplets Manipulated with Liquid Dielectrophoresis", ChemPhysChem?, Vol.13, No.14, pp.3308-3312, 2012.
  15. Takaaki Sato, Tadashi Ishida, Laurent Jalabert, Hiroyuki Fujita, "Real-time Transmission Electron Microscope Observation of Nanofriction at a Single Ag Asperity", Nanotechnology, Vol.23, No.50, 505701, 2012.
  16. Y. Tomizawa, Y.-F. Li, A. Koga, H. Toshiyoshi, Y. Ando, G. Hashiguchi, H. Fujita, "Electric Contact Stability of Anti-Wear Probes", IEICE Electronics Express, Vol.9, No.21, pp.1675-1682, 2012.
  17. R. L. Puurunen, T. Suni, O.M.E. Ylivaara, H. Kondo, M. Ammar, T. Ishida, H. Fujita, A. Bosseboeuf, S. Zaima, H. Kattelus, "Silicon Full Wafer Bonding with Atomic Layer Deposited Titanium Dioxide and Aluminum Oxide Intermediate Films", Sensors and Actuators A:Physical, Vol.188, pp.268-276, 2012.
  18. Jongho Park, Hiroyuki Fujita and Beomjoon Kim, "Fabrication of 3D Micro Structures on Nonplanar Substrates and Its Applications for Roll Micro contact Printing", (Cambridge Journals Online) MRS Online Proceedings Library, Vol.1436, mrss12-1468-vv05-14, 2012.

2011

  1. Yang-Che Chen, Chao Min Chang, Rongshun Chen, Max Ti-Kuang Hou, Hiroshi Toshiyoshi, Hiroyuki Fujita, "On the Symmetry of Electric Fields Exerting on Interdigitated Structures: Qucs Equivalent Circuit Model and Experiment", IEEE Journal of Micromechanics and Microengineering, 21, 45026, 2011.
     DOI:10.1088/0960-1317/21/4/045026
  2. Utku Baran, Masanao Tani, Masahiro Akamatsu, Yoshiaki Yasuda, Hiroyuki Fujita, Hiroshi Toshiyoshi, "A Built-in Vibration Sensor using Arc-Discharged Reactive Ion Plated PZT", IEEJ Transactons on Sensors and Micromachines, Vol.131, No.3, pp.128-129, 2011.
  3. T. Ishida, K. Kakushima, H. Fujita, "Gentle Cold Welding between Gold Nano Objects Driven by Electrical Field and Atomic Rearrangement", Journal of Applied Physics, Vol.110, 104310 (6pp), 2011.
  4. Patrick Ginet, Sho Akiyama, Nobuyuki Takama, Hiroyuki Fujita, Beomjoon Kim, "CMOS-Compatible Fabrication of Top-Gated Field-Effect Transistor Silicon Nanowire-Based Biosensors", Journal of Micromechanics and Microengineering, Vol.61, No.6, 065008 (7pp), 2011.
  5. Momoko Kumemura, Dominique Collard, Naoyoshi Sakaki, Christophe Yamahata, Maho Hosogi, Hiroyuki Fujita, "Single-DNA-Molecule Trapping with Silicon Nanotweezers using Pulsed Dielectrophoresis", Journal of Micromechanics and Microengineering, Vol.21, No.5, 054020 (6pp), 2011.
  6. T. Sato, T. Ishida, L. Jalabert, H. Fujita, "Development of MEMS-in-TEM Setup to Observe Shear Deformation for the Study of Nano-scale Friction", Tribology Online, Vol.6, No.5, pp.226-229, 2011.
  7. Raphaël Renaudot, Vincent Agache, Bruno Daunay, Pierre Lambert, Momoko Kumemura, Yves Fouillet, Dominique Collard, Hiroyuki Fujita, "Optimization of Liquid DiElectroPhoresis? (LDEP) Digital Microfluidic Transduction for Biomedical Applications", Micromachines, Vol.2, No.2, pp.258-273, 2011.
  8. Jongho Park, Hiroyuki Fujita, Beomjoon Kim, "Fabrication of Metallic Microstructure on Curved Substrate by Optical Soft Lithography and Copper Electroplating", Sensors and Actuators A, Vol.168, No.1, pp.105-111, 2011.
  9. Tadashi Ishida, Takaaki Sato, Shinsuke Nabeya, Kuniyuki Kakushima, Hiroyuki Fujita, "Highly Stable Spatio-temporal Mechanical Characterization of Nanocontact between Sharp Tips using Electrostatic Microactuator inside Transmission Electron Microscope", Japanese Journal of Applied Physics, Vol.50, No.7, ID:077201, 2011.
  10. Tadashi Ishida, Fabrizio Cleri, Kuniyuki Kakushima, Makoto Mita, Takaaki Sato, Masaki Miyata, Noriaki Itamura, Junji Endo, Hiroshi Toshiyoshi, Naruo Sasaki, Dominique Collard, Hiroyuki Fujita, "Exceptional Plasticity of Silicon Nanobridges", Nanotechnology, Vol.22, Issue 35, 355704, 2011.
  11. G. Tortissier, P. Ginet, B. Daunay, L. Jalabert, P. Lambert, B. Kim, H. Fujita, H. Toshiyoshi, "CF4 Plasma Treatment-assisted Inkjet Printing for Color Pixel Flexible Display", Journal of Micromechanics and Microengineering, Vol.21, Issue 10, 105021 (10 pages), 2011.
     DOI:10.1088/0960-1317/21/10/105021
  12. Daisuke Yamane, Winston Sun, Harunobu Seita, Shigeo Kawasaki, Hiroyuki Fujita, Hiroshi Toshiyoshi, "A Ku-band Dual-SPDT RF-MEMS Switch by Double-Side SOI Bulk Micromachining", IEEE/ASME Journal of Microelectromechanical Systems, Vol. 20, No.5, pp1211-1221, 2011.
  13. Jungwook Park, Shuhei Nishida, Pierre Lambert, Hideki Kawakatsu, Hiroyuki Fujita, "High-resolution cantilever biosensor resonating at air-liquid in a microchannel", Lab on a Chip, Vol. 11, Issue 24, pp.4187-4193, 2011.
     DOI:10.1039/C1LC20608G
  14. Tatsuhiko Sugiyama, Mitsuru Aoyama, Yasushi Shibata, Masato Suzuki, Takashi Konno, Manabu Ataka, Hiroyuki Fujita, Gen Hashiguchi, "SiO2 Electret Generated by Potassium Ions on a Comb-Drive Actuator", Applied Physics Express, Vol. 4, Issue 11, 114103 (3 pages), 2011.
     DOI:10.1143/APEX.4.114103
  15. B. Daunay, P. Lambert, L. Jalabert, M. Kumemura, R. Renaudot, V. Agache, H. Fujita, "Effect of Substrate Wettability in Liquid Dielectrophoresis (LDEP) based Droplet Generation: Theoretical Analysis and Experimental Confirmation", Lab on a Chip, Vol.12, pp.361-368, 2011.
  16. M. Laitinen, T. Sajavaara, M. Rossi, J. Julin, R.L. Puurunen, T. Suni, T. Ishida, H. Fujita, K. Arstila, B. Brijs, H.J. Whitlow, "Depth Profiling of Al₂O₃+ TiO₂ Nanolaminates by Means of a Time-of-flight Energy Spectrometer", Nuclear Instruments and Methods in Physics Research B: Beam Interactions with Materials and Atoms, Vol.269, No.24, pp.3021-3024, 2011.
  17. Y. F. Li, Y. Tomizawa, A. Koga, M. Sugiyama, G. Hashiguchi, H. Fujita, "A trench-type anti-wear microprobe with nano-scale electric contacts for AFM LAO lithography", The 24th IEEE International Conference on Micro Electro Mechanical System, MEMS 2011, pp.1337-1340, 2011.
     DOI:10.1109/MEMSYS.2011.5734681
  18. M. Kumemura, D. Collard, R. Tourvielle, N. Lafitte, K. Montagne, S. Yoshizawa, D. Fourmy, C. Yamahata, L. Jalabert, Y. Sakai, S. Takeuchi, T. Fujii, H. Fujita, "Integrated MEMS Platform with Silicon Nanotweezers and Open Microfluidic Device for Molecular and Celllular Biomechanical Assays", The 24th IEEE International Conference on Micro Electro Mechanical System, MEMS 2011, pp.67-70, 2011.
     DOI:10.1109/MEMSYS.2011.5734363
  19. J. Park, S. Nishida, H. Kawakatus, H. Fujita, "Novel Type of Microcantilever Biosensor Resonating at the Interface between Liquid and Air", The 24th IEEE International Conference on Micro Electro Mechanical System, MEMS 2011, pp.948-951, 2011.
     DOI:10.1109/MEMSYS.2011.5734583
  20. Y.-A Chapuis, L. Jalabert, E. Sarajlic, D. Collard, H. Fujita, "Polymer Membrane-based Thermo-pneumatic Actuation for Distributed Air-jet Planar Micromanipulator", The 24th IEEE International Conference on Micro Electro Mechanical System, MEMS2011, pp.141-144, 2011.
     DOI:10.1109/MEMSYS.2011.5734381
  21. E. Sarajlic, M.H. Siekman, H. Fujita, L. Abelmann, N. Tas, "A Novel Electrostatically Actuated AFM Probe for Vibro-flexural Mode Operation", The 24th IEEE International Conference on Micro Electro Mechanical System, MEMS2011, pp.537-540, 2011.
     DOI:10.1109/MEMSYS.2011.5734480
  22. M. Stranczl, E. Sarajlic, G.J.M. Krijnen, H. Fujita, M.A.M. Gijs, C. Yamahata, "Modal Analysis and Modeling of a Frictionless Electrostatic Rotary Stepper Micromotor", The 24th IEEE International Conference on Micro Electro Mechanical System, MEMS2011, pp.1257-1260, 2011.
     DOI:10.1109/MEMSYS.2011.5734661
  23. Daisuke Yamane, Yuheon Yi, Hiroyuki Fujita, Hiroshi Toshiyoshi, "A Fabrication Process of MEMS Coplanar Waveguides Using a Thick Plated Gold Layer as DRIE Mask", IEEJ Transaction on Sensors and Micromachines, Vol.131, No.3, pp.130-131, 2011.

2010

  1. Mehmet C. Tarhan, Ryuji Yokokawa, Celine Bottier, Dominique Collard and Hiroyuki Fujita, "A nano-needle/microtubule composite gliding on a kinesin-coated surface for target molecule transport", Lab On A Chip, Vol. 10, Issue 1, pp.86-91, 2010.
  2. T. Yatsui, Y. Ryu, T. Morishima, W. Nomura, T. Kawazoe, T. Yonezawa, M. Washizu, H. Fujita, M. Ohtsu, "Self-assembly method of linearly aligning ZnO quantum dots for a nanophotonic signal transmission device", Applied Physics Letters, Vol.96, No.13, 2010.
     DOI:10.1063/1.3372639
  3. Cheng-Yao Lo, O. -H. Huttunen, J. Hiitola-Keinanen, J. Petaja, H. Fujita, H. Toshiyoshi, "MEMS-Controlled Paper-Like Transmissive Flexible Display", Journal of microelectromechanical systems, Vol.19, No.2, pp.410-418, 2010.

  4.  DOI:10.1088/0960-1317/20/7/075011
  5. Moeto Nagai, Sangjin Ryu, Todd Thorsen, Paul Matsudaira and Hiroyuki Fujita, "Chemical control of Vorticella bioactuator using microfluidics", Lab on a Chip, 10, pp.1574-1578, 2010.
     DOI:10.1039/C003427D
  6. Tadashi Ishida, Kuniyuki Kakushima, Naruo Sasaki and Hiroyuki Fujita, "In situ TEM observation of nanobonding formation between silicon MEMS tips", Nanotechnology, IOP Nanotechnology, 21,435705, 2010.
     DOI:10.1088/0957-4484/21/43/435705
  7. Fabrizio Cleri, Tadashi Ishida, Dominique Collard and Hiroyuki Fujita, "Atomistic simulation of plasticity in silicon nanowires", Applied Physics Letters, 97, 153106, 2010.
     DOI:10.1063/1.3501987
  8. T. Ishida, T. Sato, S. Nabeya and H. Fujita, "Quasi-Static Frictional Test between Silicon Sharp Probes with in-situ TEM Observation of Real Contact Point", Journal of Physics: Conference Series, 258, 012011, 2010.
  9. T. Sato, T. Ishida, S. Nabeya and H. Fujita, "Nano-scale observation of frictional deformation at Ag single point contact with MEMS-in-TEM setup", Journal of Physics: Conference Series, 259, 012005, 2010.
  10. H. Fujita, T. Ishida, T. Sato and S. Nabeya, "MEMS-in-TEM for Nano Tribology", Journal of Physics: Conference Series, 259, 012004, 2010.
  11. T. Suni, R. L. Puurunen, O. Ylivaara, H. Kattlus, K. Henttinen, T. Ishida and H. Fujita, "Bonding of ALD Alumina for Advanced SOI Substrates", ECS Transactions, Vol.33, No.4, pp.137-144, 2010.
  12. Daisuke Yamane, Winston Sun, Shigeo Kawasaki, Hiroyuki Fujita, Hiroshi Toshiyoshi, "A 12GHz bulk-micromachined RF-MEMS phase shifter by SOI layer-separation design", IEICE Electronics Express, Vol.7, No.24, pp.1785-1789, 2010.
  13. Muneki Nakada, Chongho Chong, Atsushi Morosawa, Keiji Isamoto, Takuya Suzuki, Hiroyuki Fujita, Hiroshi Toshiyoshi, "Optical coherence tomography by all-optical MEMS fiber endoscope", IEICE Electronics Express, Vol.7, No.6, pp.428-433, 2010.
  14. Daisuke Yamane, Winston Sun, Harunobu Seita, Shigeo Kasawaki, Hiroyuki Fujita, Hiroshi Toshiyoshi, "An SOI bulk-micromachined dual SPDT RF-MEMS switch by layer-wise separation design of waveguide and switching mechanism", IEICE Electronics Express, Vol.7, No.2, pp.80-85, 2010.
  15. E. Sarajlic, C. Yamahata, E. Berenschot, N. Tas, H. Fujita, G. Krijnen, "High-Performance Shuffle Motor Fabricated by Vertical Trench Isolation Technology", Micromachines, Vol.1, No.2, pp.48-67, 2010.
  16. E. Sarajlic, C. Yamahata, M. Cordero, H. Fujita, "Three-Phase Electrostatic Rotary Stepper Micromotor With a Flexural Pivot Bearing", Journal of Microelctomechanical Systems, Vol.19, No.2, pp.338-349, 2010.
  17. J. Sone, T. Mizuma, S. Mochizuki, E. Sarajlic, C. Yamahata, H. Fujita, "Parameter optimization and electrode improvement of rotary stepper micromotor", Journal of advanced mechanical design, systems, and manufacturing, Vol.4, No.6, pp.1133-1144, 2010.
  18. J. Sone, T. Mizuma, M. Masunaga, S. Mochizuki, E. Sarajlic, C. Yamahata, H. Fujita, "Analysis of the Characteristics of a Rotary Stepper Micromotor" IEEJ Transactions on Sensors and Micromachines, Vol.130, No.7, pp.310-316, 2010.
  19. Moeto Nagai, Sangjin Ryu, Todd Thorsen, Paul Matsudaira, Hiroyuki Fujita, "Chemical control of Vorticella bioactuator using microfluidics", Lab Chip, Vol.10, pp.1574-1578, 2010.
  20. Moeto Nagai, Hiroshi Asai, Hiroyuki Fujita, "Contraction and extension of Vorticella and its mechanical characterization under flow loading", Biomicrofluidics, Vol.4, 34109, 2010.

2009

  1. Celine Bottier, Jacques Fattaccioli, Mehmet C. Tarhan, Ryuji Yokokawa, Fabrice O. Morin, Beomjoon Kim, Dominique Collard and Hiroyuki Fujita, "Active Transport of Oil Droplets along Oriented Microtubules by Kinesin Molecular Motor", Lab on a Chip, Vol. 9, Issue 12, pp.1694-1700, 2009.
  2. Moeto Nagai, Masamichi Oishi, Marie Oshima, Hiroshi Asai, and Hiroyuki Fujita, "Three-dimensional two-component velocity measurement of the flow field induced by the Vorticella picta microorganism using a confocal micro-PIV technique", Biomicrofluidics, 3, 014105, 2009.
     DOI:10.1063/1.3105106
  3. Cheng-Yao Lo, Johanna Hiitola-Keinanen, Olli-Heikki Huttunen, Jarno Petaja, Jukka Hast, Arto Maaninen, Harri Kopola, Hiroyuki Fujita, and Hiroshi Toshiyoshi, "Novel roll-to-roll lift-off patterned active-matrix display on flexible polymer substrate", Microelectronic Engineering, Vol.86, No.4-6, pp. 979-983, 2009.
  4. Y. Ohira, A. Chekhovskiy, T. Yamanoi, T. Endo, H. Fujita, and H. Toshiyoshi, "Hybrid MEMS optical scanner for volumetric 3-D displays", Journal of SID, Vol.17, No.5, pp.419-422, 2009.
  5. Hideyuki F. Arataa, Frederic Gillot, Dominique Collarda, Hiroyuki Fujita, "Millisecond analysis of double stranded DNA with fluorescent intercalator by micro-thermocontrol-device", Talanta, Vol.79, Issue 3, pp.963-966, 2009.
     DOI:10.1016/j.talanta.2009.04.045
  6. Janggil Kim, Nobuyuki Takama, Beomjoon Kim, Hiroyuki Fujita, "Optical-Softlithographic technology for patterning on a curved surface", Journal of Micromechanics and Microengineering, Vol.19, No.15, 055017 (8pp), 2009.
     DOI:10.1088/0960-1317/19/5/055017
  7. Moeto Nagai, Momoko Kumemura, Hiroshi Asai, and Hiroyuki Fujita, "Binding of artificial object to Vorticella for a microsystem powered by a microorganism", e-Journal of Surface Science and Nanotechnology, Vol.7, pp.673-676, 2009.
  8. Cheng-Yao Lo, Johanna Kiitola-Keinanen, Olli-Heikki Huttunen, Jarno Petaja, Jukka Hast, Arto Maaninen, Harri Kopola, Hiroyuki Fujita, and Hiroshi Toshiyoshi, "Micro Roll-to-Roll Patterning Process and Its Application on Flexible Display", apanese Journal of Applied Physics, Vol.48, No.6, Issue 2, 06FC04, 2009.
     DOI:10.1143/JJAP.48.06FC04
  9. Hideyuki F. Arata and Hiroyuki Fujita, "Miniturized thermocontrol devices enable analysis of biomolecular behavior on their timescales, second to millisecond", Integrative Biology, Vol.1, No. 5-6, pp.363-370, 2009 (The top 10 most accessed articles published inIntegratibe Biology, June 2009).
  10. Yasutaka Ohira, Hiroyuki Fujita, Hiroshi Toshiyoshi, "Miniaturization of Optical Scanners for Image Projection by MEMS Technology", Journal of The Japan Society of Mechanical Engineers, Vol.112, No.1088, pp.34-37, 2009.
  11. Ersin Altintas, Edin Sarajlic, Karl F. Bohringer and Hiroyuki Fujita, "Numerical and experimental characterization of 3-phase rectification of nanobead dielectrophoretic transport exploiting Brownian motion", Sensors and Actuators A: Physical, Vol.154, Issue 1, pp.123-131, 2009.
  12. Kazuhiro Takahashi, Makoto Mita, Hiroyuki Fujita and Hiroshi Toshiyoshi, "Switched-Layer Design for SOI Bulk Micromachined XYZ Stage Using Stiction Bar for Interlayer Electrical Connection", IEEE Journal of Microelectromechanical Systems, Vol.18, No.14, pp.818-827, 2009.
  13. Yuheon Yi, Hiroyuki Fujita, and Hiroshi Toshiyoshi, "A micromachined voltage controlled oscillator using the pull- in mechanism of electrostatic actuation", IEICE Electronics Express, Vol.6, No.17, pp.1266-1271, 2009.
  14. A Chapuis, A Debray, L Jalabert and H Fujita, "Alternative approach in 3-D MEMS-IC integration using fluidic self-assembly techniques", Journal of Micromechanics and Microengineering, Vol.19, No.10, 105002, 2009.
     DOI:10.1088/0960-1317/19/10/105002
  15. L. Jalabert, C. Bottier, M. Kumemura and H. Fujita, "Embedded vertical nanosheets of SiO2 in PDMS using an alternative nanopatterning process", The Journal of Vacuum Science and Technology B, Vol.27, No.6, pp.3055-3058, 2009.
  16. L. Jalabert, M. Kumemura, C.Bottier, H. Fujita, "Nanoscale surface engineering of PDMS by embedding vertical SiO2 nanosheets", Microelectronic Engineering, Vol.87, Issues 5-8, 2009.
     DOI:10.1016/j.mee.2009.11.138
  17. D. Dubuc, K. Grenier, H. Toshiyoshi, H. Fujita, "Plastic-based microfabrication of artificial dielectric for miniaturized microwave integrated circuits", Metamaterials, Vol.3, pp.165-173, 2009.
  18. S. Hage-Ali, N. Tiercelin , P. Coquet, R. Sauleau, H. Fujita, V. Preobrazhensky, P. Pernod , "A Millimeter-Wave Microstrip Antenna Array on Ultra Flexible Micromachined Polydimethylsiloxane (PDMS) Polymer", IEEE Antennas and Wireless Propagation letters, Vol.8, pp.1306-1309, 2009.
  19. K. Grenier, D. Dubuc, P-E. Poleni, M. Kumemura, H. Toshiyoshi, T. Fujii, H. Fujita, "Integrated Broadband Microwave and Microfluidic Sensor dedicated to Bioengineering", IEEE Trans. on Microwave Theory and Techniques, Vol.57, No.12, pp.3246-3253, 2009.
  20. A. Debray, M. Shibata and H. Fujita, "Thermal modification of the rigidity of micro-structures by the phase transition of a fusible alloy", Journal of Micromechanics and Microengineering, Vol.19, No.5, 2009.
  21. E. Sarajlic, C. Yamahata, M. Cordero, H. Fujita, "An electrostatic 3-phase linear stepper motor fabricated by vertical trench isolation technology", Journal of Micromechanics and Microengineering, Vol.19, No.7, 074001, 2009.
     DOI:10.1088/0960-1317/19/7/074001

2008

  • Christophe Yamahata, Dominique Collard, Bernard Legrand, Tetsuya Takekawa, Momoko Kumemura, Gen Hashiguchi, and Hiroyuki Fujita, "Silicon nanotweezers with subnanometer resolution for the micromanipulation of biomolecules," Journal of Microelectromechanical Systems 17 (3), pp. 623-631 (2008).
     DOI:10.1109/JMEMS.2008.922080
  • Edin Sarajlic, Christophe Yamahata, Mauricio Cordero, Dominique Collard, and Hiroyuki Fujita, "HAREM: High Aspect Ratio Etching and Metallization for microsystems fabrication," Journal of Micromechanics and Microengineering 18 (7), No. 075008, 2008.
     DOI: 10.1088/0960-1317/18/7/075008
  • Hirofumi Miura, Junji Sone, Dominique Collard, Christophe Yamahata, and Hiroyuki Fujita, "FEM Analysis of Mechanical Characteristics of Nano Tweezers with MemsOne?(TM)," IEEJ Transactions on Sensors and Micromachines 128 (5), pp. 252-256, 2008.
     DOI:10.1541/ieejsmas.128.252
  • Christophe Yamahata, Dominique Collard, Tetsuya Takekawa, Momoko Kumemura, Gen Hashiguchi, Hiroyuki Fujita, "Humidity dependence of charge transport through DNA revealed by silicon-based nanotweezers manipulation," Biophysical Journal 94 (1), pp. 63-70, 2008.
     DOI:10.1529/biophysj.107.115980

2007

  • Momoko Kumemura, Dominique Collard, Christophe Yamahata, Naoyoshi Sakaki, Gen Hashiguchi, and Hiroyuki Fujita, "Single DNA Molecule Isolation and Trapping in a Microfluidic Device," ChemPhysChem? 8 (12), pp. 1875-1880, 2007.
    Online Article:  DOI:10.1002/cphc.200700268 | Cover Picture:  DOI:10.1002/cphc.200790037
  • Dominique Collard, Christophe Yamahata, Bernard Legrand, Tetsuya Takekawa, Momoko Kumemura, Naoyoshi Sakaki, Gen Hashiguchi, and Hiroyuki Fujita, "Towards mechanical characterization of biomolecules by MNEMS tools," IEEJ Transactions on Electrical and Electronic Engineering 2 (3), pp. 262-271, 2007.
     DOI:10.1002/tee.20154
  • Edin Sarajlic, Christophe Yamahata, and Hiroyuki Fujita, "Towards wet anisotropic silicon etching of perfect pyramidal pits," Microelectronic Engineering 84 (5-8), pp. 1419-1422, 2007.
     DOI:10.1016/j.mee.2007.01.250
  • Edin Sarajlic, Dominique Collard, Hiroshi Toshiyoshi, and Hiroyuki Fujita, "Design and modeling of compliant micromechanism for mechanical digital-to-analog conversion of displacement," IEEJ Transactions on Electrical and Electronic Engineering 2 (3), pp. 357-364, 2007.
     DOI:10.1002/tee.20150



cover_ChemPhysChem_2007.jpg
M. Kumemura et al., Chem PhysChem? 8 (12), pp. 1875-1880, 2007.
Cover Picture | Online Article


2006

  • Hideyuki F. Arata, Peter Low, Koji Ishizuka, Christian Bergaud, Beomjoon Kim, Hiroyuki Noji, and Hiroyuki Fujita, "Temperature Distribution Measurement on Microfabricated Thermodevice for Single Biomolecular Observation Using Fluorescent Dye", /Sensors & Actuators B: Chemical,/ in press.
  • single F1-ATPase rotary biomolecular motor using microfabricated local Selected by /Nanoscale Science & Technology, /March 6^th . 2006, Vol.13, Issue 9 and /Biological Physics Research,/ March 1, 2006, Vol. 11 Issue 5.
  • Satoshi Yamaguchi, Shinji Matsumoto, Koji Ishizuka, Kazuhito V. Tabata, Hideyuki F. Arata, Hiroyuki Fujita, Hiroyuki Noji, Itaru switches the rotation of F_1 -ATPase in an on/off manner at a single

2005

  • Y. Rondelez, G. Tresset, K. V. Tabata, H. Arata, H. Fujita, S.
  • Measurement at High Temperature by Pulse Heating of Micro Reactor with 234-238. (in Japanese)
  • Hideyuki F. Arata, Yannick Rondelez, Hiroyuki Noji, Hiroyuki Fujita, Chemistry, /Vol. 77, No. 15, August 1, 2005, pp. 4810-4814.

2004

  • R. Yokokawa, S. Takeuchi, T. Kon, M. Nishiura, K. Sutoh, H. Fujita, "Unidirectional transport of kinesin-coated beads on microtubules oriented in a microfluidic device," Nano Letters.(in press; Web Release Date: 22-Oct-2004)
  • Ryuji Yokokawa, Shoji Takeuchi, Hiroyuki Fujita, "Ultra-smooth glass channels for bioassay with motor proteins," Analyst, vol. 129, pp. 850-854, 2004.
  • Ryuji YOKOKAWA, Shoji TAKEUCHI, M. Nishiura, R. Ohkura, T. Kon, K. Sutoh, H. Fujita, "Hybrid Nano Transfer System by Biomolecular Linear Motors," Journal of Microelectromechanical Systems, vol. 13, no. 4, pp. 612-619, 2004.
  • Makoto Mita, Hiroshi Toshiyoshi, Manabu Ataka, and Hiroyuki Fujita, "Generation of Random Numbers by Micromechanism," IEEJ Trans. SM, vol. 124, No. 9, 2004, pp. 316-320
  • Keiji Isamoto, Atsushi Morosawa, Masataka Tei, Hiroyuki Fujita and Hiroshi Toshiyoshi, "A 5-volt operated MEMS variable optical attenuator by SOI bulk micromachining," IEEE J. Selected Topics in Quantum Elec (JSTQE), vol. 10, No. 3, May-June 2004, pp. 570-578.
  • Keiji Isamoto, Atsushi Morosawa, Masataka Tei, Hiroyuki Fujita and Hiroshi Toshiyoshi, "MEMS Variable Optical Attenuator using Asymmetricaly Driven Paralle Plate Tilt Mirror," IEEJ Trans. SM, vol. 124, No. 6, 2004, pp. 213-218
  • Tomonori Yoshino, Hiroshi Toshiyoshi, Makoto Mita, Dai Kobayashi, and Hiroyuki Fujita, "An Electrostatic Microactuator for Positioning a Hard-Disk Drive Magnetic Head," IEEJ Trans. SM, Vol. 124, No. 1, 2004, pp. 21-27
  • Hideyuki Arata, Shoji Takeuchi, Hiroyuki Noji, Hiroyuki Fujita, Trans. SM,/ vol. 124, No. 8, 2004, pp. 284-288 (in Japanese)

2003

  • Gen Hashiguchi, Takushi Goda, Maho Hosogi, Ken Hirano, Noritada Kaji, Yoshinobu Baba, Kuniyuki Kakushima, Hiroyuki Fujita, "DNA manipulation and retrieval from an aqueous solution with micromachined nanotweezers," Anal. Chem. 75 (17), pp. 4347-4350, 2003.
     DOI:10.1021/ac034501p
  • Matthieu Denoual, Laurent Griscom, Hiroshi Toshiyoshi and Hiroyuki Fujita, "Accurate Double-Height Micromolding Method for Three-Dimensional Polydimethylsiloxane Structures ", Jpn. J. Appl. Phys. Vol. 42 (2003) pp.4598-4601.
  • Kunihiko Saruta, Hiroyuki Fujita, and Hiroshi Toshiyoshi, "Fabrication of Micro Lens Optical Scanner on SOI Wafer," IEEJ Trans. SM, Vol. 123, No. 7 (2003), pp. 231-236.
  • Yamato Fukuta, Hiroyuki Fujita, and Hiroshi Toshiyoshi, "Vapor Hydrofluoric Acid Sacrificial Release Technique for Micro Electro Mechanical Systems Using Labware," Jpn. J. Appl. Phys. Vol. 42, Part 1, No. 6A (2003), pp. 3690 - 3694.

2002

  • H. Kawakatsu, S. Kawai, D. Saya, M. Nagashio, D. Kobayashi, H. Toshiyoshi, and H. Fujita, "Towards atomic force microscopy up to 100 MHz," Review of Scientific Instruments, Vol. 73, No. 6 (2002), pp. 2317-2320.
  • Hideki Kawakatsu, Daisuke Saya, Atsushi Kato, Kimitake Fukushima, Hiroshi Toshiyoshi, and Hiroyuki Fujita, "Millions of cantilevers for atomic force microscopy," Review of Scientific Instruments, Vol. 73, No. 3 (2002), pp. 1188-1192.
  • D. Saya, K. Fukushima, H. Toshiyoshi, G. Hashiguchi, H. Fujita, H. Kawakatsu, "Fabrication of single-crystal Si cantilever array," Sensors and Actuators A: Physical, vol. 95, Issue 2-3, 2002, pp. 281-287.
  • H. Toshiyoshi, M. Mita, and H. Fujita, "A MEMS Piggyback Actautor for Hard-Disk Drives," IEEE J. Microelectromech. Syst., vol. 11, No. 6, Dec. 2002, pp. 648-654.

2001

  • Daisuke Saya, Kimitake Fukushima, Hiroshi Toshiyoshi, Gen Hashiguchi, Hiroyuki Fujita, Hideki Kawakatsu, "Fabrication of Nanometric Oscillators," Seisan-Kenkyu, vol. 53, No. 2 (2001.2), pp. 135-138.
  • Kimitake Fukushima, Daisuke Saya, Hiroshi Toshiyoshi, Hiroyuki Fujita, Hideki Kawaktsu, "Characterization of Silicon Nanocantilevers," Seisan-Kenkyu, vol. 53, No. 2 (2001.2), pp. 139-142.
  • Kouichi Yamashita, Hiroyuki Fujita, Hiroshi Toshiyoshi, "Fabrication and Characterization of Acoustic Frequency Analysis Sensors made of SOI Wafers," Seisan-Kenkyu, vol. 53, No. 2 (2001.2), pp. 143-146. (in Japanese)

2000

  • Hiroyuki Fujita and Hiroshi Toshiyoshi, "Micromechanical Optical Devices," Oyo Buturi (Transaction of Japan Society of Applied Physics), vol. 69, No. 11, 2000, pp. 1274-1284 (in Japanese, invited).
  • Hiroyuki Fujita and Hiroshi Toshiyoshi, "Optical MEMS," IEICE Trans. Electron., vol. E83-C, No. 9, September 2000, p. 1427 - 1434.
  • Makoto Mita, Yoshio Mita, Hiroshi Toshiyoshi, Hiroyuki Fujita, "Multiple-height Microstructures Fabricated by ICP-RIE and Embedded Masking Layers," Trans. Institute of Electrical Engineers of Japan,vol. 120-E, No.11, November. 2000, p.493.
  • Daisuke Saya, Kimitake Fukushima, Hiroshi Toshiyoshi, Hiroyuki Fujita, Gen Hashiguchi, Hideki Kawakatsu, "Fabrication of Silicon-Based Filiform-Necked Nanometric Oscillators," Jpn. J. Appl. Phys. Vol. 39, Part 1. No. 6B (June 2000) pp.3793-3798.
  • H. Kawakatsu, H. Toshiyoshi, D. Saya, K. Fukushima, H. Fujita, "Strength measurement and calculations on silicon-based nanometric oscillators for scanning force microcopy operating in the gigahertz range," Applied Surface Science, vol.157, (no.4), (NC-AFM'99. Second International Workshop on Noncontact Atomic Force Microscopy, Pontresina, Switzerland, 1-4 Sept. 1999.) Elsevier, April 2000. p.320-5. 13 references.
  • Hiroshi Toshiyoshi, Dai Kobayashi, Makoto Mita, Gen Hashiguchi, Hiroyuki Fujita, Junji Endo, Yasuo Wada, "Microelectromechanical Digital-to-Analog Converter of Displacement for Step Motion Actuators," IEEE/ASME J. Microelectromech. Sys. vol. 9, June 2000, p.218-225.
  • H. Kawakatsu, H. Toshiyoshi, D. Saya, K. Fukushima, H. Fujita, "Fabrication of a silicon based nanometric oscillator with a tip form mass for scanning force microcopy operating in the GHz range," J. Vac. Sci. & Tech. B18, No,.2 (2000) p.607-11.

1999

  • H. Kawakatsu, H. Toshiyoshi, D. Saya, H. Fujita "Fabrication Technique of Nanometri Mechanical Oscillator," Seisan-Kenkyu vol. 51 (no. 8), Aug. 1999, p. 663. (Institute of Industrial Science, University of Tokyo, Tokyo, Japan)
  • H. Toshiyoshi, D. Kobayashi, M. Mita, G. Hashiguchi, H. Fujita, J. Endo, Y. Wada, "Step Motion Actuators by Silicon Micromachining," Seisan-Kenkyu vol. 51 (no. 8), Aug. 1999, p. 647. (Institute of Industrial Science, University of Tokyo, Tokyo, Japan) (in Japanese)
  • Jean Podlecki,k Masao Nshioka, Hiroshi Toshiyoshi, Yasuhiko Arakawa, Hiroyuki Fujita, "Tunable Vertical Cavity laser and Photodetector for Free Space Interconnection," Seisan-Kenkyu vol. 51 (no. 8), Aug, 1999, p. 626 (Institute of Industrial Science, University of Tokyo, Tokyo, Japan)
  • Hiroshi Toshiyoshi, Dai Kobayashi, Makoto Mita, Gen Hashiguchi, Hiroyuki Fujita, Junji Endo, Yasuo Wada, "A Digital-to-Analog Conveter of Displacement by Integrated Micromechanism," Jpn. J. Appl. Phys. Vol.38(1999) Part 1, No. 6B, 30 June 1999, p. 3962.
  • Kyoseok Chun, Gen Hashiguchi, Hiroshi Toshiyoshi and Hiroyuki Fujita, "Fabrication of Array of Hollow Microcapillaries Used for Injection of Genetic Materials into Animal/Plant Cells ," Jpn. J. Appl. Phys. Vol.38 (1999) pp.L279-L281 , Part 2, No. 3A, 1 March 1999.
  • Hideki Kawakatsu, Hiroshi Toshiyoshi, Daisuke Saya, Hiroyuki Fujita, "A Silicon Based Nanometric Oscillator for Scanning Force Microscopy Operation in the 100 MHz Range," Japanese Journal of Appl. Phys. vol. 38, Part 1, No. 6B, June 1999, pp. 3962-3965.
  • Hiroshi Toshiyoshi, Masahide Goto, Makoto Mita, Hiroyuki Fujita, Dai Kobayashi, Gen Hashiguchi, Junji Endo, Yasuo Wada, "Fabrication of Micromechanical Tunneling Probes and Actuators on a Silicon Chip," Japanese J. Appl. Phys. vol. 38, Part 1, No. 12B (Special Issue on Microprocesses & Nanotechnology), Dec. 1999, pp. 7185-7189.
  • Makoto Mita, Yoshio Mita, Hiroshi Toshiyoshi, Hiroyuki Fujita, "Delay-Msking Process for Silicon Three-Dimensional Bulk Structures," Trans. IEE Japan, 199-E(5), pp.310-311, 1999 (in Japanese)
  • Muneo Harada, Naoki Ikeuchi, Shoichi Fukui, Hiroshi Toshiyoshi, Hiroyuki Fujita, Shigeru Ando, "Micro Mechanical Acoustic Sensor toward Artificial Basilar Membrane Modeling," Trans. IEE Japan, vol.119-E, No.3 (1999) pp.125-130.
  • Hiroshi Toshiyoshi, Daisuke Miyauchi, Hiroyuki Fujita, "Electromagnetic Torsion Mirrors for Self-Aligned Fiber Optic Cross-connectors by Silicon Micromachining," IEEE Journal of Selected Topics in Quantum Electronics (JSTQE), special issue on Micro-Opto-Electro Mechanical Systems (MOEMS), vol.5, No.1 (1999), pp.10-17. [PDF 636 kB]
  • Eric Bonnotte, Christophe Gorecki, Hiroshi Toshiyoshi, Hideki Kawakatsu, Hiroyuki Fujita, K.Worhoff, Ken-ya Hashimoto, "Guided-Wave Acoustooptic Interaction with Phase Modulation in a ZnO Thin-Film Transducer onan Si-Based Integrated Mach-Zehnder Interferometer," JEEE/OSA Journal of Lightwave Technology (JLT), vol. 17, No. 1 (1999), pp. 35-42.
  • Hiroshi Toshiyoshi, Masakazu Kobayashi, Daisuke Miyauchi, Hiroyuki Fujita, "Design and Analysis of Micromechanical Tunable Interferometers for WDM Free-Space Optical Interconnection," JEEE/OSA Journal of Lightwave Technology (JLT), vol. 17, No. 1 (1999), pp. 19-25.
  • Daisuke Miyauchi, Hiroshi Toshiyoshi, Hiroyuki Fujita, "Self-Alignment Fabrication Technique Surface-Micromachined Optical Switches to Bulk-Micromachined V-Grooves," Trans. IEE Japan, vol. 119-E, No. 2 (1999) pp.108-112.

添付ファイル: filecover_ChemPhysChem_2007.jpg 7件 [詳細]

トップ   編集 凍結 差分 バックアップ 添付 複製 名前変更 リロード   新規 一覧 単語検索 最終更新   ヘルプ   最終更新のRSS
Last-modified: 2017-02-17 (金) 15:14:30 (490d)