2013

2012

  1. S. Maruyama, M. Nakada, M. Mita, T. Takahashi, H. Fujita, H. Toshiyoshi, "An Equivalent Circuit Model for Vertical Comb Drive MEMS Optical Scanner Controlled by Pulse Width Modulation", 電気学会論文誌E, Vol. 132, No. 1, pp. 1-9, 2012.
  2. 冨澤泰, 安藤泰久, 藤田博之, 「ナノスケールプローブ先端の電気的コンタクト特性」, 日本機械学会論文集(C 編), 78巻, 786号, pp.615-626, 2012.
  3. 三田信, 丸山智史, 藤田博之, 年吉洋, 「分岐型サスペンション構造への運動方程式等価回路モデルの応用」, 電気学会論文誌E, Vol.132, No.3, pp.64-65, 2012.
  4. 石田忠、藤田博之, 「シリコンと金のナノスケール接触界面のリアルタイムTEM観察」, 表面科学, Vol.33, No.3, pp.159-164, 2012.

2011

  1. 藤田博之, 久米村百子, 榊 直由, 監修・馬場嘉信, 「テクノロジー時代のバイオ分離・計測技術」, 第�鵺編, 第1章3, pp.34-44, シーエムシー出版, 2011.
  2. 藤田博之, Electronic Journal 別冊「2011マイクロマシン/MEMS技術大全」(CD-ROM版), 第2編, 第3章, pp.26-29, �鷏電子ジャーナル, 2011.
  3. Yang-Che Chen, Chao Min Chang, Rongshun Chen, Max Ti-Kuang Hou, Hiroshi Toshiyoshi, Hiroyuki Fujita, "On the Symmetry of Electric Fields Exerting on Interdigitated Structures: Qucs Equivalent Circuit Model and Experiment", IEEE Journal of Micromechanics and Microengineering, 21, 45026, 2011.
    DOI:10.1088/0960-1317/21/4/045026
  4. 山根大輔, 李 宥憲, 藤田博之, 年吉 洋, 「メッキ金の厚膜マスクによるRF-MEMSコプレーナ導波路の製作」, 電気学会E部門誌, Vol.131, No.3, pp.130-131, 2011.
  5. Shinji Yamashita, Makoto Mita, Hiroyuki Fujita, Tsuyoshi Yamamoto, Masaaki Kawai, Mitsuhiro Yano, "Spatial Light Phase Modulator With Bidirectional Tilt–Piston Micromirror Array―Part II: Fabrication and Experiment", IEEE Journal of Microelectromechanical Systems, Vol.20, No.1, pp.279-287, 2011.
  6. Shinji Yamashita, Makoto Mita, Hiroyuki Fujita, Ryuichi Hirade, Tsuyoshi Yamamoto, Masaaki Kawai, Mitsuhiro Yano, "Spatial Light Phase Modulator With Bidirectional Tilt–Piston Micromirror Array―Part I: Principle and Design", IEEE Journal of Microelectromechanical Systems, Vol.20, No.1, pp.270-278, 2011.
  7. Utku Baran, Masanao Tani, Masahiro Akamatsu, Yoshiaki Yasuda, Hiroyuki Fujita, Hiroshi Toshiyoshi, "A Built-in Vibration Sensor using Arc-Discharged Reactive Ion Plated PZT", IEEJ Transactons on Sensors and Micromachines, Vol.131, No.3, pp.128-129, 2011.
  8. T. Ishida, K. Kakushima, H. Fujita, "Gentle Cold Welding between Gold Nano Objects Driven by Electrical Field and Atomic Rearrangement", Journal of Applied Physics, Vol.110, 104310 (6pp), 2011.
  9. Patrick Ginet, Sho Akiyama, Nobuyuki Takama, Hiroyuki Fujita, Beomjoon Kim, "CMOS-Compatible Fabrication of Top-Gated Field-Effect Transistor Silicon Nanowire-Based Biosensors", Journal of Micromechanics and Microengineering, Vol.61, No.6, 065008 (7pp), 2011.
  10. Momoko Kumemura, Dominique Collard, Naoyoshi Sakaki, Christophe Yamahata, Maho Hosogi, Hiroyuki Fujita, "Single-DNA-Molecule Trapping with Silicon Nanotweezers using Pulsed Dielectrophoresis", Journal of Micromechanics and Microengineering, Vol.21, No.5, 054020 (6pp), 2011.
  11. T. Sato, T. Ishida, L. Jalabert, H. Fujita, "Development of MEMS-in-TEM Setup to Observe Shear Deformation for the Study of Nano-scale Friction", Tribology Online, Vol.6, No.5, pp.226-229, 2011.
  12. Raphaël Renaudot, Vincent Agache, Bruno Daunay, Pierre Lambert, Momoko Kumemura, Yves Fouillet, Dominique Collard, Hiroyuki Fujita, "Optimization of Liquid DiElectroPhoresis? (LDEP) Digital Microfluidic Transduction for Biomedical Applications", Micromachines, Vol.2, No.2, pp.258-273, 2011.
  13. Jongho Park, Hiroyuki Fujita, Beomjoon Kim, "Fabrication of Metallic Microstructure on Curved Substrate by Optical Soft Lithography and Copper Electroplating", Sensors and Actuators A, Vol.168, No.1, pp.105-111, 2011.
  14. Tadashi Ishida, Takaaki Sato, Shinsuke Nabeya, Kuniyuki Kakushima, Hiroyuki Fujita, "Highly Stable Spatio-temporal Mechanical Characterization of Nanocontact between Sharp Tips using Electrostatic Microactuator inside Transmission Electron Microscope", Japanese Journal of Applied Physics, Vol.50, No.7, ID:077201, 2011.
  15. Tadashi Ishida, Fabrizio Cleri, Kuniyuki Kakushima, Makoto Mita, Takaaki Sato, Masaki Miyata, Noriaki Itamura, Junji Endo, Hiroshi Toshiyoshi, Naruo Sasaki, Dominique Collard, Hiroyuki Fujita, "Exceptional Plasticity of Silicon Nanobridges", Nanotechnology, Vol.22, Issue 35, 355704, 2011.
  16. G. Tortissier, P. Ginet, B. Daunay, L. Jalabert, P. Lambert, B. Kim, H. Fujita, H. Toshiyoshi, "CF4 Plasma Treatment-assisted Inkjet Printing for Color Pixel Flexible Display", Journal of Micromechanics and Microengineering, Vol.21, Issue 10, 105021 (10 pages), 2011.
    DOI:10.1088/0960-1317/21/10/105021
  17. Daisuke Yamane, Winston Sun, Harunobu Seita, Shigeo Kawasaki, Hiroyuki Fujita, Hiroshi Toshiyoshi, "A Ku-band Dual-SPDT RF-MEMS Switch by Double-Side SOI Bulk Micromachining", IEEE/ASME Journal of Microelectromechanical Systems, Vol. 20, No.5, pp1211-1221, 2011.
  18. Jungwook Park, Shuhei Nishida, Pierre Lambert, Hideki Kawakatsu, Hiroyuki Fujita, "High-resolution cantilever biosensor resonating at air-liquid in a microchannel", Lab on a Chip, Vol. 11, Issue 24, pp.4187-4193, 2011.
    DOI:10.1039/C1LC20608G
  19. Tatsuhiko Sugiyama, Mitsuru Aoyama, Yasushi Shibata, Masato Suzuki, Takashi Konno, Manabu Ataka, Hiroyuki Fujita, Gen Hashiguchi, "SiO2 Electret Generated by Potassium Ions on a Comb-Drive Actuator", Applied Physics Express, Vol. 4, Issue 11, 114103 (3 pages), 2011.
    DOI:10.1143/APEX.4.114103
  20. B. Daunay, P. Lambert, L. Jalabert, M. Kumemura, R. Renaudot, V. Agache, H. Fujita, "Effect of Substrate Wettability in Liquid Dielectrophoresis (LDEP) based Droplet Generation: Theoretical Analysis and Experimental Confirmation", Lab on a Chip, Vol.12, pp.361-368, 2011.
  21. M. Laitinen, T. Sajavaara, M. Rossi, J. Julin, R.L. Puurunen, T. Suni, T. Ishida, H. Fujita, K. Arstila, B. Brijs, H.J. Whitlow, "Depth Profiling of Al₂O₃+ TiO₂ Nanolaminates by Means of a Time-of-flight Energy Spectrometer", Nuclear Instruments and Methods in Physics Research B: Beam Interactions with Materials and Atoms, Vol.269, No.24, pp.3021-3024, 2011.
  22. Y. F. Li, Y. Tomizawa, A. Koga, M. Sugiyama, G. Hashiguchi, H. Fujita, "A trench-type anti-wear microprobe with nano-scale electric contacts for AFM LAO lithography", The 24th IEEE International Conference on Micro Electro Mechanical System, MEMS 2011, pp.1337-1340, 2011.
    DOI:10.1109/MEMSYS.2011.5734681
  23. M. Kumemura, D. Collard, R. Tourvielle, N. Lafitte, K. Montagne, S. Yoshizawa, D. Fourmy, C. Yamahata, L. Jalabert, Y. Sakai, S. Takeuchi, T. Fujii, H. Fujita, "Integrated MEMS Platform with Silicon Nanotweezers and Open Microfluidic Device for Molecular and Celllular Biomechanical Assays", The 24th IEEE International Conference on Micro Electro Mechanical System, MEMS 2011, pp.67-70, 2011.
    DOI:10.1109/MEMSYS.2011.5734363
  24. J. Park, S. Nishida, H. Kawakatus, H. Fujita, "Novel Type of Microcantilever Biosensor Resonating at the Interface between Liquid and Air", The 24th IEEE International Conference on Micro Electro Mechanical System, MEMS 2011, pp.948-951, 2011.
    DOI:10.1109/MEMSYS.2011.5734583
  25. Y.-A Chapuis, L. Jalabert, E. Sarajlic, D. Collard, H. Fujita, "Polymer Membrane-based Thermo-pneumatic Actuation for Distributed Air-jet Planar Micromanipulator", The 24th IEEE International Conference on Micro Electro Mechanical System, MEMS2011, pp.141-144, 2011.
    DOI:10.1109/MEMSYS.2011.5734381
  26. E. Sarajlic, M.H. Siekman, H. Fujita, L. Abelmann, N. Tas, "A Novel Electrostatically Actuated AFM Probe for Vibro-flexural Mode Operation", The 24th IEEE International Conference on Micro Electro Mechanical System, MEMS2011, pp.537-540, 2011.
    DOI:10.1109/MEMSYS.2011.5734480
  27. M. Stranczl, E. Sarajlic, G.J.M. Krijnen, H. Fujita, M.A.M. Gijs, C. Yamahata, "Modal Analysis and Modeling of a Frictionless Electrostatic Rotary Stepper Micromotor", The 24th IEEE International Conference on Micro Electro Mechanical System, MEMS2011, pp.1257-1260, 2011.
    DOI:10.1109/MEMSYS.2011.5734661

2010

  1. Mehmet C. Tarhan, Ryuji Yokokawa, Celine Bottier, Dominique Collard and Hiroyuki Fujita, "A nano-needle/microtubule composite gliding on a kinesin-coated surface for target molecule transport", Lab On A Chip, Vol. 10, Issue 1, pp.86-91, 2010.
  2. T. Yatsui, Y. Ryu, T. Morishima, W. Nomura, T. Kawazoe, T. Yonezawa, M. Washizu, H. Fujita, M. Ohtsu, "Self-assembly method of linearly aligning ZnO quantum dots for a nanophotonic signal transmission device", Applied Physics Letters, Vol.96, No.13, 2010.
    DOI:10.1063/1.3372639
  3. Cheng-Yao Lo, O. -H. Huttunen, J. Hiitola-Keinanen, J. Petaja, H. Fujita, H. Toshiyoshi, "MEMS-Controlled Paper-Like Transmissive Flexible Display", Journal of microelectromechanical systems, Vol.19, No.2, pp.410-418, 2010.
  4. T. Ishida, Y. Nakajima, K. Kakushima, M. Mita, H. Toshiyoshi, H. Fujita, "Design and fabrication of MEMS-controlled probes for studying the nano-interface under in situ TEM observation", Journal of Micromechanics and Microengineering, 20, 075011, 2010.
    DOI:10.1088/0960-1317/20/7/075011
  5. Moeto Nagai, Sangjin Ryu, Todd Thorsen, Paul Matsudaira and Hiroyuki Fujita, "Chemical control of Vorticella bioactuator using microfluidics", Lab on a Chip, pp.1574-1578, 2010.
    DOI:10.1039/c003427d
  6. Tadashi Ishida, Kuniyuki Kakushima, Naruo Sasaki and Hiroyuki Fujita, "In situ TEM observation of nanobonding formation between silicon MEMS tips", Nanotechnology, IOP Nanotechnology, 21,435705, 2010.
    DOI:10.1088/0957-4484/21/43/435705
  7. Fabrizio Cleri, Tadashi Ishida, Dominique Collard and Hiroyuki Fujita, "Atomistic simulation of plasticity in silicon nanowires", Applied Physics Letters, 97, 153106, 2010.
    DOI:10.1063/1.3501987
  8. T. Ishida, T. Sato, S. Nabeya and H. Fujita, "Quasi-Static Frictional Test between Silicon Sharp Probes with in-situ TEM Observation of Real Contact Point", Journal of Physics: Conference Series, 258, 012011, 2010.
  9. T. Sato, T. Ishida, S. Nabeya and H. Fujita, "Nano-scale observation of frictional deformation at Ag single point contact with MEMS-in-TEM setup", Journal of Physics: Conference Series, 259, 012005, 2010.
  10. H. Fujita, T. Ishida, T. Sato and S. Nabeya, "MEMS-in-TEM for Nano Tribology", Journal of Physics: Conference Series, 259, 012004, 2010.
  11. T. Suni, R. L. Puurunen, O. Ylivaara, H. Kattlus, K. Henttinen, T. Ishida and H. Fujita, "Bonding of ALD Alumina for Advanced SOI Substrates", ECS Transactions, Vol.33, No.4, pp.137-144, 2010.
  12. Daisuke Yamane, Winston Sun, Shigeo Kawasaki, Hiroyuki Fujita, Hiroshi Toshiyoshi, "A 12GHz bulk-micromachined RF-MEMS phase shifter by SOI layer-separation design", IEICE Electronics Express, Vol.7, No.24, pp.1785-1789, 2010.
  13. Muneki Nakada, Chongho Chong, Atsushi Morosawa, Keiji Isamoto, Takuya Suzuki, Hiroyuki Fujita, Hiroshi Toshiyoshi, "Optical coherence tomography by all-optical MEMS fiber endoscope", IEICE Electronics Express, Vol.7, No.6, pp.428-433, 2010.
  14. Daisuke Yamane, Winston Sun, Harunobu Seita, Shigeo Kasawaki, Hiroyuki Fujita, Hiroshi Toshiyoshi, "An SOI bulk-micromachined dual SPDT RF-MEMS switch by layer-wise separation design of waveguide and switching mechanism", IEICE Electronics Express, Vol.7, No.2, pp.80-85, 2010.
  15. E. Sarajlic, C. Yamahata, E. Berenschot, N. Tas, H. Fujita, G. Krijnen, "High-Performance Shuffle Motor Fabricated by Vertical Trench Isolation Technology", Micromachines, Vol.1, No.2, pp.48-67, 2010.
  16. E. Sarajlic, C. Yamahata, M. Cordero, H. Fujita, "Three-Phase Electrostatic Rotary Stepper Micromotor With a Flexural Pivot Bearing", Journal of Microelctomechanical Systems, Vol.19, No.2, pp.338-349, 2010.
  17. J. Sone, T. Mizuma, S. Mochizuki, E. Sarajlic, C. Yamahata, H. Fujita, "Parameter optimization and electrode improvement of rotary stepper micromotor", Journal of advanced mechanical design, systems, and manufacturing, Vol.4, No.6, pp.1133-1144, 2010.
  18. J. Sone, T. Mizuma, M. Masunaga, S. Mochizuki, E. Sarajlic, C. Yamahata, H. Fujita, "Analysis of the Characteristics of a Rotary Stepper Micromotor" IEEJ Transactions on Sensors and Micromachines, Vol.130, No.7, pp.310-316, 2010.
  19. Moeto Nagai, Sangjin Ryu, Todd Thorsen, Paul Matsudaira, Hiroyuki Fujita, "Chemical control of Vorticella bioactuator using microfluidics", Lab Chip, Vol.10, pp.1574-1578, 2010.
  20. Moeto Nagai, Hiroshi Asai, Hiroyuki Fujita, "Contraction and extension of Vorticella and its mechanical characterization under flow loading", Biomicrofluidics, Vol.4, 34109, 2010.
    DOI:10.1063/1.3481777

2009

  1. Celine Bottier, Jacques Fattaccioli, Mehmet C. Tarhan, Ryuji Yokokawa, Fabrice O. Morin, Beomjoon Kim, Dominique Collard and Hiroyuki Fujita, "Active Transport of Oil Droplets along Oriented Microtubules by Kinesin Molecular Motor", Lab on a Chip, Vol. 9, Issue 12, pp.1694-1700, 2009.
  2. Moeto Nagai, Masamichi Oishi, Marie Oshima, Hiroshi Asai, and Hiroyuki Fujita, "Three-dimensional two-component velocity measurement of the flow field induced by the Vorticella picta microorganism using a confocal micro-PIV technique", Biomicrofluidics, 3, 014105, 2009.
  3. Cheng-Yao Lo, Johanna Hiitola-Keinanen, Olli-Heikki Huttunen, Jarno Petaja, Jukka Hast, Arto Maaninen, Harri Kopola, Hiroyuki Fujita, and Hiroshi Toshiyoshi, "Novel roll-to-roll lift-off patterned active-matrix display on flexible polymer substrate", Microelectronic Engineering, Vol.86, No.4-6, pp. 979-983, 2009.
  4. Y. Ohira, A. Chekhovskiy, T. Yamanoi, T. Endo, H. Fujita, and H. Toshiyoshi, "Hybrid MEMS optical scanner for volumetric 3-D displays", Journal of SID, Vol.17, No.5, pp.419-422, 2009.
  5. Hideyuki F. Arataa, Frederic Gillot, Dominique Collarda, Hiroyuki Fujita, "Millisecond analysis of double stranded DNA with fluorescent intercalator by micro-thermocontrol-device", Talanta, Vol.79, Issue 3, pp.963–966, 2009.
  6. Janggil Kim, Nobuyuki Takama, Beomjoon Kim, Hiroyuki Fujita, "Optical-Softlithographic technology for patterning on a curved surface", Journal of Micromechanics and Microengineering, Vol.19, No.15, 055017 (8pp), 2009.
  7. Moeto Nagai, Momoko Kumemura, Hiroshi Asai, and Hiroyuki Fujita, "Binding of artificial object to Vorticella for a microsystem powered by a microorganism", e-Journal of Surface Science and Nanotechnology, Vol.7, pp.673-676, 2009.
  8. Cheng-Yao Lo, Johanna Kiitola-Keinanen, Olli-Heikki Huttunen, Jarno Petaja, Jukka Hast, Arto Maaninen, Harri Kopola, Hiroyuki Fujita, and Hiroshi Toshiyoshi, "Micro Roll-to-Roll Patterning Process and Its Application on Flexible Display", Jpn. J. Appl. Phys., Vol.48, No.6, Issue 2, 06FC04, 2009.
  9. Hideyuki F. Arata and Hiroyuki Fujita, "Miniturized thermocontrol devices enable analysis of biomolecular behavior on their timescales, second to millisecond", Integrative Biology, Vol.1, No. 5-6, pp.363-370, 2009(The top 10 most accessed articles published inIntegratibe Biology, June 2009).
  10. 大平康隆、藤田博之、年吉 洋, 「MEMS技術による画像描画用光スキャナの小型化」, 日本機械学会誌, Vol.112, No.1088, pp.34-37, 2009.
  11. Ersin Altintas, Edin Sarajlic, Karl F. Bohringer and Hiroyuki Fujita, "Numerical and experimental characterization of 3-phase rectification of nanobead dielectrophoretic transport exploiting Brownian motion", Sensors and Actuators A: Physical, Vol.154, Issue 1, pp.123-131, 2009.
  12. Kazuhiro Takahashi, Makoto Mita, Hiroyuki Fujita and Hiroshi Toshiyoshi, "Switched-Layer Design for SOI Bulk Micromachined XYZ Stage Using Stiction Bar for Interlayer Electrical Connection", IEEE Journal of Microelectromechanical Systems, Vol.18, No.14, pp.818-827, 2009.
  13. Yuheon Yi, Hiroyuki Fujita, and Hiroshi Toshiyoshi, "A micromachined voltage controlled oscillator using the pull- in mechanism of electrostatic actuation", IEICE Electronics Express, Vol.6, No.17, pp.1266-1271, 2009.
  14. A Chapuis, A Debray, L Jalabert and H Fujita, "Alternative approach in 3-D MEMS-IC integration using fluidic self-assembly techniques", Journal of Micromechanics and Microengineering, Vol.19, No.10, 105002 (9pp)  , 2009.
  15. L. Jalabert, C. Bottier, M. Kumemura and H. Fujita, "Embedded vertical nanosheets of SiO2 in PDMS using an alternative nanopatterning process", The Journal of Vacuum Science and Technology B, Vol.27, No.6, pp.3055-3058, 2009.
  16. L. Jalabert, M. Kumemura, C.Bottier, H. Fujita, "Nanoscale surface engineering of PDMS by embedding vertical SiO2 nanosheets", Microelectronic Engineering, doi:10.1016/j.mee.2009.11.138, 2009.
  17. D. Dubuc, K. Grenier, H. Toshiyoshi, H. Fujita, "Plastic-based microfabrication of artificial dielectric for miniaturized microwave integrated circuits", Metamaterials, Vol.3, pp.165-173, 2009.
  18. S. Hage-Ali, N. Tiercelin , P. Coquet, R. Sauleau, H. Fujita, V. Preobrazhensky, P. Pernod , "A Millimeter-Wave Microstrip Antenna Array on Ultra Flexible Micromachined Polydimethylsiloxane (PDMS) Polymer", IEEE Antennas and Wireless Propagation letters, Vol.8, pp.1306-1309, 2009.
  19. K. Grenier, D. Dubuc, P-E. Poleni, M. Kumemura, H. Toshiyoshi, T. Fujii, H. Fujita, "Integrated Broadband Microwave and Microfluidic Sensor dedicated to Bioengineering", IEEE Trans. on Microwave Theory and Techniques, Vol.57, No.12, pp.3246-3253, 2009.
  20. A. Debray, M. Shibata and H. Fujita, "Thermal modification of the rigidity of micro-structures by the phase transition of a fusible alloy", Journal of Micromechanics and Microengineering, Vol.19, No.5, 2009.
  21. E. Sarajlic, C. Yamahata, M. Cordero, H. Fujita, "An electrostatic 3-phase linear stepper motor fabricated by vertical trench isolation technology", Journal of Micromechanics and Microengineering, Vol.19, No.7, 074001, 2009.

2008

  1. Frédéric Gillot, Fabrice Olivier Morin, Hideyuki F. Arata, Régis Guégan, Hajime Tanaka and Hiroyuki Fujita, "On-chip thermal calibration with 8 CB liquid crystal of micro-thermal device", Lab on a Chip, Vol.7, Issue 11 , pp.1600-1602, 2007.
  2. Christophe Yamahata, Dominique Collard, Tetsuya Takekawa, Momoko Kumemura, Gen Hashiguchi, and Hiroyuki Fujita, "Humidity Dependence of Charge Transport through DNA Revealed by Silicon-Based Nanotweezers Manipulation", Biophysical Journal, Vol. 94, No.1 , pp.63-70, 2008.
  3. R. Yokokawa, M. C. Tarhan, T. Kon, and H. Fujita, "Simultaneous and Bidirectional Transport of Kinesin-Coated Microspheres and Dynein-Coated Microspheres on Polarity-Oriented Microtubules", Biotechnol. Bioeng., Vol.101, pp.1-8, 2008.
  4. B Charlot, W Sun, K Yamashita, H Fujita and H Toshiyoshi, "Bistable nanowire for micromechanical memory", Journal of Micromechanics and Microengineering, Vol. 18, No. 4, 045005 (7pp) , 2008.
  5. Ryoichi Ohigashi, Katsunori Tsuchiya, Yoshio Mita, and Hiroyuki Fujita, "Electric Ejection of Viscous Inks From MEMS Capillary Array Head for Direct Drawing of Fine Patterns", Journal of Microelectromechanical Systems, Vol.17, No.2, pp.272-277, 2008.
  6. 谷雅直, 赤松雅洋, 安田喜昭, 藤田博之, 年吉 洋, 「圧電MEMS光スキャナによる画像ディスプレイ」, レーザー学会誌レーザー研究, Vol.36, No.4, pp.183-189, 2008.
  7. Hirofumi Miura, Junji Sone, Dominique Collard, Christophe Yamahata, Hiroyuki Fujita, "FEM Analysis of Mechanical Characteristics of Nano Tweezers with MemsOne?(TM)", 電気学会論文誌, Eセンサ・マイクロマシン部門誌, Vol.128, No.5 , pp.252-256, 2008.
  8. V.Senez, E.Lennon, S. Ostrovidov, T. Yamamoto, H.Fujita, Y. Sakai, and T. Fujii, "Integrated 3-D Silicon Electrodes for Electrochemical Sensing in Microfluidic Environments: Application to Single-Cell Characterization", IEE Sonsors Journal, Vol.8, Nos. 5&6, pp.548-557, 2008.
  9. Cheng-Yao Lo, Hiroyuki Fujita, and Hiroshi Toshiyoshi, "Toward realization of transmissive display by MEMS etalon", IEICE ELEX, Vol.5, No.9, pp.326-331, 2008.
  10. Christophe Yamahata, Dominique Collard, Bernard Legrand, Tetsuya Takekawa, Momoko Kumemura, Gen Hashiguchi, and Hiroyuki Fujita, "Silicon Nanotweezers With Subnanometer Resolution for the Micromanipulation of Biomolecules", Journal of Microelectromechanical Systems, Vol.17, No.3, pp.623-631, 2008.
  11. E. Sarajlic, C. Yamahata, M. Cordero, D. Collard, and H. Fujita, "HAREM: High Aspect Ratio Etching and Metallization for microsystems fabrication", Journal of Micromechanics and Microengineering, Vol. 18, No. 7 , 075008 (8 pp.), 2008.
  12. Hideyuki F. Arata, Frederic Gillot, Takahiko Nojima, Teruo Fujii and Hiroyuki Fujita, "Millisecond denaturation dynamics of fluorescent proteins revealed by femtoliter container on micro-thermodevice", Lab on a Chip, Vol.8, Issue 9, pp.1436–1440, 2008(A Communication, named on the front cover).
  13. R. Yokokawa, J. Miwa, M. C. Tarhan, H. Fujita, and M. Kasahara, "DNA molecule manipulation by motor proteins for its evaluation in single molecule level", Anal. Bioanal. Chem., Vol.391, No.8, pp.2735-43, 2008.
  14. Dominique Collard, Shoji Takeuchi and Hiroyuki Fujita, "MEMS technology for nanobio research", Drug Discovery Today, Vol. 13, Issues 21-22, pp. 989-996, 2008.
  15. Ersin Altintas, Karl F. Bohringer, and Hiroyuki Fujita, "Micromachined Linear Brownian Motor: Transportation of Nanobeads by Brownian Motion Using Three-Phase Dielectrophoretic Ratchet", Japanese Journal of Applied Physics, Vol. 47, No. 11, pp.8673-8677, 2008.
  16. Y.-A. Chapuisa, L. Zhoua, H. Fujita and Y. Hervea, , "Multi-Domain Simulation Using VHDL-AMS For Distributed MEMS In Functional Environment: Case Of A 2-D Air-Jet Micromanipulator", Sensors & Actuators: A. Physical, Vol. 148, Issue 1, pp.224-238, 2008.
  17. Ataka, M.; Legrand, B.; Buchaillot, L.; Collard, D.; Fujita, H., "Design, Fabrication, and Operation of Two-Dimensional Conveyance System With Ciliary Actuator Arrays", IEEE/ASME Transactions on Mechatronics, Vol. 14, Issue1, pp.119-125, 2009.
  18. Tadashi Ishida, Yuuki Nakajima, Junji Endo, Dominique Collard and Hiroyuki Fujita, "Real-time transmission electron microscope observation of gold nanoclusters diffusing into silicon at room temperature", Nanotechnology, Vol.20, No.6, pp.65705.1-6 , 2009.
  19. Tetsuhiko Iizuka, Naomichi Sakai and Hiroyuki Fujita, "Position Feedback Control using Magneto Impedance Sensors on Conveyor with Superconducting Magnetic Levitation", Sensors and Actuators A: Physical, Vol. 150, Issue 1 , pp.110-115, 2009.
  20. Satoshi Yamaguchi, Shinji Matsumoto, Koji Ishizuka, Yuko Iko, Kazuhito V. Tabata, Hideyuki Arata, Hiroyuki Fujita, Hiroyuki Noji, Itaru Hamachi, “Thermally responsive supramolecular nano-meshes for on/off switching of the rotary motion of F1-ATPase at a single molecular level”, Chemistry - A European Journal (IF 5.454), 2008, 14(6):1891-6.
  21. Liza Lam, Shouichi Sakakihara, Koji Ishizuka, Shoji Takeuchi, Hideyuki F. Arata, Hiroyuki Fujita, Hiroyuki Noji, "Loop-mediated isothermal amplification of a single DNA molecule in polyacrylamide gel-based microchamber", Biomedical Microdevices (IF 2.924), (2008) 10:539-546.
  22. Hideyuki F. Arata, Momoko Kumemura, Naoyoshi Sakaki, and Hiroyuki Fujita, “Towards single biomolecular handling and characterization by MEMS” (Review), Analytical Biological Chemistry (IF 3.328), (2008) 391(7), 2385-2393.

2007

  1. Hideo Muro. Takahiko Oki. Akira Asaoka. Tarik Bourouina. Gilbert Ryene. Alexis Debray. Eric Lebrasseur. Hiroyuki Fujita,"A Method to Measure Beam Deflections in Different Resonance Modes Piezoresistively and its Incorporation into 2D Optical Microscanners",電気学会論文誌E(センサ・マイクロマシン準部門誌) ,Vol.127. No.1. 2007,pp.31-36.
  2. Murat Gel. Tadashi Ishida. Tetsuo Akasaka. Akinori Umeno. Koji Araki. Kaz Hirakawa. and Hiroyuki Fujita,"Mechanically Controlled Quantum Contact With On-Chip MEMS Actuator",Journal of Microelectromechanical Systems,Vol.16. No.1. February 2007,pp.1-6.
  3. Kazuhiro Takahashi. Ho Nam Kwon. Makoto Mita. Kunihiko Saruta. Jong-Hyun Lee. Hiroyuki Fujita. Hiroshi Toshiyoshi,"A Silicon Micromachined f-θ(thetha) Microlens Scanner Array by Double-Deck Device Design Technique",IEEE Journal of Selected Topics in Quantum Electronics,Vol.13. No.2. March/April 2007,pp.277-282.
  4. 泰井祐輔. 角嶋邦之. 横川隆司. 小野志亜之. 高橋琢二. 諫本圭史. 鄭昌鎬. 藤田博之. 年吉洋,「フッ酸. オゾン. HMDSを用いたMEMSデバイスの全気相処理によるスティクション力低減」,電気学会論文誌Eセンサ・マイクロマシン準部門誌,Vol.127. No.4. 2007,pp.221-227.
  5. Edin Sarajlic. Dominique Collard. Hiroshi Toshiyoshi. Hiroyuki Fujita,"Design and Modeling of Compliant Micromechanism for Mechanical Digital-to-Analog Conversion of Displacement",IEEJ Transactions on Electrical and Electronic Engineering,Vol.20. No.3. 2007,pp.357-364.
  6. Naoyuki Nozawa. Kuniyuki Kakushima. Gen Hashiguchi. Hiroyuki Fujita,"In situ Visualization of Degradation of Silicon Field Emitter Tips",IEEJ Transactions on Electrical and Electronic Engineering,Vol.20. No.3. 2007,pp.284-288.
  7. Michael Zickar. Makoto Mita. Manabu Ataka. Hiroyuki Fujita,"Low Cross Talk Design and Simple Fabrication Process of Electrostatic Vertical Comb-drive Actuators for Positioning Application",IEEJ Transactions on Electrical and Electronic Engineering,Vol.20. No.3. 2007,pp.289-294.
  8. Dominique Collard. Christophe Yamahata. Bernard Legrand. Tetsuya Takekawa. Momoko Kumemura. Naoyoshi Sakaki. Gen Hashiguchi. Hiroyuki Fujita,"Towards Mechanical Characterization of Biomolecules by MNEMS Tools",IEEJ Transactions on Electrical and Electronic Engineering,Vol.20. No.3,pp.262-271 E. Sarajlic. C. Yamahata. H. Fujita,"Towards wet anisotropic silicon etching of perfect pyramidal pits",Microelectronic Engineering,Vol.84. Issue 5-8,pp.1419-1422.
  9. K. Yamashita. W. Sun. B. Charlot. K. Kakushima. H. Fujita. and H. Toshiyoshi,"Vacuum. temperature. and time dependencies of field-emission current for RF-MEMS applications",Microelectronic Engineering,Vol.84. Issue 5-8,pp.1345-1353.
  10. A Debray. K Ueda. M Shibata. H Fujita,"Fabrication of suspended metallic structures: application to a one-shot micro-valve",IEICE Electronics Express,Vol. 4 (2007) . No. 14,pp.455-460.
  11. A Debray. M Shibata and H Fujita,"A low melting point alloy as a functional material for a one-shot micro-valve",J. Micromech. Microeng.,Vol.17. No.8 ,pp.1442-1450.
  12. M. Kumemura. D. Collard. C. Yamahata. N. Sakaki. G. Hashiguchi. and H. Fujita,"Single DNA Molecule isolation and trapping in a microfluidic device",CHEMPHYSCHEM,Vol.8. No.12,pp.1875-1880.
  13. M.Kumemura. D.Collard. C.Yamahata. N.Sakaki. G.Hashiguchi. H.Fujita,"Cover picture: Single DNA Molecule isolation and trapping in a microfluidic device",CHEMPHYSCHEM,Vol.8,p.1733.
  14. Hiroyuki Fujita,"MEMS for Heterogeneous Integration of Devices and Functionality",Journal of Semiconductor Technology and Science. Special issue on Nano/Micro System Technologies,Vol.7. No.3,pp.133-139.
  15. 藤田博之. 年吉洋,「大面積MEMS技術と整合する黒板型ディスプレイの制作と評価」,日本画像学会誌,第46巻. 第5号,pp.51-56.
  16. F. Rose. H. Fujita and H. Kawakatsu,"Real-time observation of FIB-created dots and ripples on GaAs?" Nanotechnology,Vol.19,pp.035301-035307.
  17. F. Gillot, F. O. Morin, H. F. Arata, R. Guegan, H. Tanaka, and H. Fujita, “On-chip thermal calibration with 8 CB liquid crystal of micro-thermal device”, Lab on a Chip (IF 6.478), 2007, 7, 1600-1602.

2006

  1. R. Yokokawa. Y. Yumi. S. Takeuchi. T. Kon. and H. Fujita, "Unidirectional transport of a bead on a single microtubule immobilized in a submicrometre channel", Nanotechnology, Vol.17, 2006, pp.289-294.
  2. Hideyuki Arata. Peter Löw. Koji Ishizuka. Christian Bergaud. Beomjoon Kim. Hiroyuki Noji. Hiroyuki Fujita, "Temperature Distribution Measurement on Microfabricated Thermodevice for Single Biomolecular Observation Using Fluorescent dye", Sensors and Actuators B, Vol.117, pp.339-345. 藤田博之, 「MEMSとトライボロジー」,月刊トライボロジー, No.222, pp.16-19.
  3. Benjamin Caillard. Yoshio Mita. Yamato Fukuta. Tadashi Shibata. and Hiroyuki Fujita, "A Highly Simple Failure Detection Method for Electrostatic Microactuators: Application to Automatic Testing and Accelerated Lifetime Estimation", IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING, Vol.19. No.1, February 2006, pp.35-42.
  4. Shoogo Ueno. Joji Ando. Hiroyuki Fujita. Tadashi Sugawara. Yasuhiko Jinbo. Keiji Itaka. Kazunori Kataoka. and Takashi Ushida, "The State of the Art of Nanobioscience in Japan", IEEE Transaction on Nanobioscience, Vol.5, No.1, March 2006, pp.54-65.
  5. K.Yamashita. W.Sun. K. Kakushima. H.Fujita. and H.Toshiyoshi, "RF microelectromechanical system device with a lateral field-emission detector" ,J. Vac. Sci. Technol. B, Vol.24, No.2, pp.927-931.
  6. R. Shigematsu. A. Higo. H. Toshiyoshi and H. Fujita, "An Electrostatically Latched and Magnetically Erased MEMS re-Writable Btimap Image Display", IEICE Electronics Express, Vol. 3 (2006). No. 5, pp.87-91.
  7. Kenjiro Ayano. Katuyori Suzuki. Gen Hashiguchi. Hiroyuki Fujita, "Electromechanical Analysis of a Micromachined Comb-Drive Actuator by Admittance Measurement", 電気学会論文誌E. センサ・マイクロマシン準部門誌, Vol.126, No.7, pp.281-285.
  8. Alexis Debray. Yves-Andre Chapuis. Masaaki Shibata and Hiroyuki Fujita, "Fluidic self-alignment applied to a micro-fluidic system", IEICE Electron. Express, Vol.3, No.11, pp.227-232.
  9. Ryuji Yokokawa. Tomohiko Saika. Testuya Nakayama. Hiroyuki Fujita and Satoshi Konishi, "On-chip syringe pumps for picoliter-scale liquid manipulation", Lab Chip. 2006, Vol.6, pp.1062-1066.
  10. 飯塚哲彦. 坂井直道. 藤田博之, 「高温超電導体への部分的着磁ガイドを用いた磁気浮上搬送の基礎研究」, 電気学会論文誌. センサ・マイクロマシン準部門誌, Vol.126, No.6, pp.248-254.
  11. 薗部忠. 広井典良. 竹中充. 中野義昭. 藤田博之, 「高密度光IC用ファイバアレイOPLEAF」,電気学会論文誌E. センサ・マイクロマシン準部門誌,Vol.126. No.6,pp.255-260.
  12. F. Rose. P. Martin. H Fujita. and H Kawakatsu, "Adsorption and combing of DNA on HOPG surfaces of bulk crystals and nanosheets: application to the bridging of DNA between HOPG/Si heterostructures", Nanotechnology, Vol.17, No.13 (2006), pp.3325-3332.
  13. Yamato Fukuta. Yves-Andre Chapuis. Yoshio Mita. and Hiroyuki Fujita, "Design. Fabrication. and Control of MEMS-Based Actuator Arrays for Air-Flow Distributed Micromanipulation", IEEE Journal of Microelectromechanical Systems, Vol.15, No.4, pp.212-226.
  14. A. Debray. T. Nakakubo. A.Yokoi. S. Mogi. K. Ueda. M. Shibata. S. Takeuchi and H. Fujita,"A micro-machined safety valve for power applications with improved sealing",Journal of Micromechanics and Microengineering,16,pp.S240-S247.
  15. Y. Yoshida. R. Yokokawa. H. Suzuki. K. Atsuta. H. Fujita. and S. Takeuchi,"Biomolecular linear motors confined to move upon micro-patterns on glass",Journal of Micromechanics and Microengineering,Vol. 16,pp.1550-1554.
  16. F.Rose. M. Hattori. D. Kobayashi. H. Toshiyoshi. H. Fujita and H. Kawakatsu,"Application of capillary forces and stiction for lateral displacement. alignment. suspension and locking of self-assembled microcantilevers",Journal of Micromechanics and Microengineering,Vol16. No10 (2006),pp.2077-2085.
  17. Nicolas Tiercelin. Philippe Coquet. Ronan Sauleau. Vincent Senez and Hiroyuki Fujita,"Polydimethylsiloxane membranes for millimeter-wave planar ultra flexible antennas",Journal of Micromechanics and Microengineering,Vol.16,pp.2389-2395.
  18. 石田忠. 角嶋邦之. 藤田博之,「MEMS方向探針による金ナノコンタクト接近-衝突-引張-破断実験のHRTEM観察と電流測定」,電気学会論文誌E. センサ・マイクロマシン準部門誌,Vol.126. No.9,pp.504-509.
  19. F.Rose. A.Debray. P.Martin. H.Fujita. and H.Kawakatsu,"Suspended HOPG nanosheets for HOPG nanoresonators engineering and new carbon nanostructures synthesis",Nanotechnology,Vol. 17. No. 20 (2006),pp.5192-5200 .
  20. Hiroyuki Fujita,"Evolution from MEMS-based Linear Drives to Bio-based Drives",電気学会論文誌D(産業応用部門誌),平成18年10月号. IEEJ Trans. IA. Vol.126. No.10,pp.1314-1318.

2005

  1. Y. Rondelez, G. Tresset, K. V. Tabata, H. Arata, H. Fujita, S. Takeuchi, H. Noji, ”Microfabricated arrays of femtoliter chambers allow single molecule enzymology”, /Nature biotechnology,/ 2005 Mar;23(3):361-5.
  2. Hideyuki Arata, Hiroyuki Noji, Hiroyuki Fujita, “Enzymatic Activity Measurement at High Temperature by Pulse Heating of Micro Reactor with On-Chip Micro Heater”, /IEEJ Trans. SM,/ vol. 125, No. 5, 2005, pp. 234-238. (in Japanese)
  3. Hideyuki F. Arata, Yannick Rondelez, Hiroyuki Noji, Hiroyuki Fujita, ” Temperature Alternation by an On-Chip Microheater To Reveal Enzymatic Activity of β-Galactosidase at High Temperatures”,* */Analytical Chemistry, /Vol. 77, No. 15, August 1, 2005, pp. 4810-4814.

2004

  1. R. Yokokawa, S. Takeuchi, T. Kon, M. Nishiura, K. Sutoh, H. Fujita, "Unidirectional transport of kinesin-coated beads on microtubules oriented in a microfluidic device," Nano Letters.(in press; Web Release Date: 22-Oct-2004)
  2. Ryuji Yokokawa, Shoji Takeuchi, Hiroyuki Fujita, "Ultra-smooth glass channels for bioassay with motor proteins," Analyst, vol. 129, pp. 850-854, 2004.
  3. Ryuji YOKOKAWA, Shoji TAKEUCHI, M. Nishiura, R. Ohkura, T. Kon, K. Sutoh, H. Fujita, "Hybrid Nano Transfer System by Biomolecular Linear Motors," Journal of Microelectromechanical Systems, vol. 13, no. 4, pp. 612-619, 2004.
  4. 新田英之, 竹内昌治, 野地博行, 藤田博之, 「顕微鏡観察下における局所的温度制御のためのマイクロデバイス」, 電気学会誌、vol. 124-E, no. 8, pp. 284-288, 2004. (in Japanese)
  5. Makoto Mita, Hiroshi Toshiyoshi, Manabu Ataka, and Hiroyuki Fujita, "Generation of Random Numbers by Micromechanism," IEEJ Trans. SM, vol. 124, No. 9, 2004, pp. 316-320.
  6. Keiji Isamoto, Atsushi Morosawa, Masataka Tei, Hiroyuki Fujita and Hiroshi Toshiyoshi, "A 5-volt operated MEMS variable optical attenuator by SOI bulk micromachining," IEEE J. Selected Topics in Quantum Elec (JSTQE), vol. 10, No. 3, May-June 2004, pp. 570-578.
  7. Keiji Isamoto, Atsushi Morosawa, Masataka Tei, Hiroyuki Fujita and Hiroshi Toshiyoshi, "MEMS Variable Optical Attenuator using Asymmetricaly Driven Paralle Plate Tilt Mirror," IEEJ Trans. SM, vol. 124, No. 6, 2004, pp. 213-218.
  8. Tomonori Yoshino, Hiroshi Toshiyoshi, Makoto Mita, Dai Kobayashi, and Hiroyuki Fujita, "An Electrostatic Microactuator for Positioning a Hard-Disk Drive Magnetic Head," IEEJ Trans. SM, Vol. 124, No. 1, 2004, pp. 21-27.
  9. Hideyuki Arata, Shoji Takeuchi, Hiroyuki Noji, Hiroyuki Fujita, “Micro Device for Local Temperature Control under Microscope”, /IEEJ Trans. SM,/ vol. 124, No. 8, 2004, pp. 284-288 (in Japanese)

2003

  1. Matthieu Denoual, Laurent Griscom, Hiroshi Toshiyoshi and Hiroyuki Fujita, "Accurate Double-Height Micromolding Method for Three-Dimensional Polydimethylsiloxane Structures ", Jpn. J. Appl. Phys. Vol. 42 (2003) pp.4598-4601.
  2. Kunihiko Saruta, Hiroyuki Fujita, and Hiroshi Toshiyoshi, "Fabrication of Micro Lens Optical Scanner on SOI Wafer," IEEJ Trans. SM, Vol. 123, No. 7 (2003), pp. 231-236.
  3. Yamato Fukuta, Hiroyuki Fujita, and Hiroshi Toshiyoshi, "Vapor Hydrofluoric Acid Sacrificial Release Technique for Micro Electro Mechanical Systems Using Labware," Jpn. J. Appl. Phys. Vol. 42, Part 1, No. 6A (2003), pp. 3690 - 3694.

2002

  1. H. Kawakatsu, S. Kawai, D. Saya, M. Nagashio, D. Kobayashi, H. Toshiyoshi, and H. Fujita, "Towards atomic force microscopy up to 100 MHz," Review of Scientific Instruments, Vol. 73, No. 6 (2002), pp. 2317-2320.
  2. Hideki Kawakatsu, Daisuke Saya, Atsushi Kato, Kimitake Fukushima, Hiroshi Toshiyoshi, and Hiroyuki Fujita, "Millions of cantilevers for atomic force microscopy," Review of Scientific Instruments, Vol. 73, No. 3 (2002), pp. 1188-1192.
  3. D. Saya, K. Fukushima, H. Toshiyoshi, G. Hashiguchi, H. Fujita, H. Kawakatsu, "Fabrication of single-crystal Si cantilever array," Sensors and Actuators A: Physical, vol. 95, Issue 2-3, 2002, pp. 281-287.
  4. H. Toshiyoshi, M. Mita, and H. Fujita, "A MEMS Piggyback Actautor for Hard-Disk Drives," IEEE J. Microelectromech. Syst., vol. 11, No. 6, Dec. 2002, pp. 648-654.

2001

  1. Daisuke Saya, Kimitake Fukushima, Hiroshi Toshiyoshi, Gen Hashiguchi, Hiroyuki Fujita, Hideki Kawakatsu, "Fabrication of Nanometric Oscillators," Seisan-Kenkyu, vol. 53, No. 2 (2001.2), pp. 135-138.
  2. Kimitake Fukushima, Daisuke Saya, Hiroshi Toshiyoshi, Hiroyuki Fujita, Hideki Kawaktsu, "Characterization of Silicon Nanocantilevers," Seisan-Kenkyu, vol. 53, No. 2 (2001.2), pp. 139-142.
  3. Kouichi Yamashita, Hiroyuki Fujita, Hiroshi Toshiyoshi, "Fabrication and Characterization of Acoustic Frequency Analysis Sensors made of SOI Wafers," Seisan-Kenkyu, vol. 53, No. 2 (2001.2), pp. 143-146. (in Japanese)

2000

  1. Hiroyuki Fujita and Hiroshi Toshiyoshi, "Micromechanical Optical Devices," Oyo Buturi (Transaction of Japan Society of Applied Physics), vol. 69, No. 11, 2000, pp. 1274-1284 (in Japanese, invited).
  2. Hiroyuki Fujita and Hiroshi Toshiyoshi, "Optical MEMS," IEICE Trans. Electron., vol. E83-C, No. 9, September 2000, p. 1427 - 1434.
  3. Makoto Mita, Yoshio Mita, Hiroshi Toshiyoshi, Hiroyuki Fujita, "Multiple-height Microstructures Fabricated by ICP-RIE and Embedded Masking Layers," Trans. Institute of Electrical Engineers of Japan,vol. 120-E, No.11, November. 2000, p.493.
  4. Daisuke Saya, Kimitake Fukushima, Hiroshi Toshiyoshi, Hiroyuki Fujita, Gen Hashiguchi, Hideki Kawakatsu, "Fabrication of Silicon-Based Filiform-Necked Nanometric Oscillators," Jpn. J. Appl. Phys. Vol. 39, Part 1. No. 6B (June 2000) pp.3793-3798.
  5. H. Kawakatsu, H. Toshiyoshi, D. Saya, K. Fukushima, H. Fujita, "Strength measurement and calculations on silicon-based nanometric oscillators for scanning force microcopy operating in the gigahertz range," Applied Surface Science, vol.157, (no.4), (NC-AFM'99. Second International Workshop on Noncontact Atomic Force Microscopy, Pontresina, Switzerland, 1-4 Sept. 1999.) Elsevier, April 2000. p.320-5. 13 references.
  6. Hiroshi Toshiyoshi, Dai Kobayashi, Makoto Mita, Gen Hashiguchi, Hiroyuki Fujita, Junji Endo, Yasuo Wada, "Microelectromechanical Digital-to-Analog Converter of Displacement for Step Motion Actuators," IEEE/ASME J. Microelectromech. Sys. vol. 9, June 2000, p.218-225.
  7. H. Kawakatsu, H. Toshiyoshi, D. Saya, K. Fukushima, H. Fujita, "Fabrication of a silicon based nanometric oscillator with a tip form mass for scanning force microcopy operating in the GHz range," J. Vac. Sci. & Tech. B18, No,.2 (2000) p.607-11.

1999

  1. H. Kawakatsu, H. Toshiyoshi, D. Saya, H. Fujita "Fabrication Technique of Nanometri Mechanical Oscillator," Seisan-Kenkyu vol. 51 (no. 8), Aug. 1999, p. 663. (Institute of Industrial Science, University of Tokyo, Tokyo, Japan)
  2. H. Toshiyoshi, D. Kobayashi, M. Mita, G. Hashiguchi, H. Fujita, J. Endo, Y. Wada, "Step Motion Actuators by Silicon Micromachining," Seisan-Kenkyu vol. 51 (no. 8), Aug. 1999, p. 647. (Institute of Industrial Science, University of Tokyo, Tokyo, Japan) (in Japanese)
  3. Jean Podlecki,k Masao Nshioka, Hiroshi Toshiyoshi, Yasuhiko Arakawa, Hiroyuki Fujita, "Tunable Vertical Cavity laser and Photodetector for Free Space Interconnection," Seisan-Kenkyu vol. 51 (no. 8), Aug, 1999, p. 626 (Institute of Industrial Science, University of Tokyo, Tokyo, Japan)
  4. Hiroshi Toshiyoshi, Dai Kobayashi, Makoto Mita, Gen Hashiguchi, Hiroyuki Fujita, Junji Endo, Yasuo Wada, "A Digital-to-Analog Conveter of Displacement by Integrated Micromechanism," Jpn. J. Appl. Phys. Vol.38(1999) Part 1, No. 6B, 30 June 1999, p. 3962.
  5. Kyoseok Chun, Gen Hashiguchi, Hiroshi Toshiyoshi and Hiroyuki Fujita, "Fabrication of Array of Hollow Microcapillaries Used for Injection of Genetic Materials into Animal/Plant Cells ," Jpn. J. Appl. Phys. Vol.38 (1999) pp.L279-L281 , Part 2, No. 3A, 1 March 1999.
  6. Hideki Kawakatsu, Hiroshi Toshiyoshi, Daisuke Saya, Hiroyuki Fujita, "A Silicon Based Nanometric Oscillator for Scanning Force Microscopy Operation in the 100 MHz Range," Japanese Journal of Appl. Phys. vol. 38, Part 1, No. 6B, June 1999, pp. 3962-3965.
  7. Hiroshi Toshiyoshi, Masahide Goto, Makoto Mita, Hiroyuki Fujita, Dai Kobayashi, Gen Hashiguchi, Junji Endo, Yasuo Wada, "Fabrication of Micromechanical Tunneling Probes and Actuators on a Silicon Chip," Japanese J. Appl. Phys. vol. 38, Part 1, No. 12B (Special Issue on Microprocesses & Nanotechnology), Dec. 1999, pp. 7185-7189.
  8. Makoto Mita, Yoshio Mita, Hiroshi Toshiyoshi, Hiroyuki Fujita, "Delay-Msking Process for Silicon Three-Dimensional Bulk Structures," Trans. IEE Japan, 199-E(5), pp.310-311, 1999 (in Japanese)
  9. Muneo Harada, Naoki Ikeuchi, Shoichi Fukui, Hiroshi Toshiyoshi, Hiroyuki Fujita, Shigeru Ando, "Micro Mechanical Acoustic Sensor toward Artificial Basilar Membrane Modeling," Trans. IEE Japan, vol.119-E, No.3 (1999) pp.125-130.
  10. Hiroshi Toshiyoshi, Daisuke Miyauchi, Hiroyuki Fujita, "Electromagnetic Torsion Mirrors for Self-Aligned Fiber Optic Cross-connectors by Silicon Micromachining," IEEE Journal of Selected Topics in Quantum Electronics (JSTQE), special issue on Micro-Opto-Electro Mechanical Systems (MOEMS), vol.5, No.1 (1999), pp.10-17. [PDF 636 kB]
  11. Eric Bonnotte, Christophe Gorecki, Hiroshi Toshiyoshi, Hideki Kawakatsu, Hiroyuki Fujita, K.Worhoff, Ken-ya Hashimoto, "Guided-Wave Acoustooptic Interaction with Phase Modulation in a ZnO Thin-Film Transducer onan Si-Based Integrated Mach-Zehnder Interferometer," JEEE/OSA Journal of Lightwave Technology (JLT), vol. 17, No. 1 (1999), pp. 35-42.
  12. Hiroshi Toshiyoshi, Masakazu Kobayashi, Daisuke Miyauchi, Hiroyuki Fujita, "Design and Analysis of Micromechanical Tunable Interferometers for WDM Free-Space Optical Interconnection," JEEE/OSA Journal of Lightwave Technology (JLT), vol. 17, No. 1 (1999), pp. 19-25.
  13. Daisuke Miyauchi, Hiroshi Toshiyoshi, Hiroyuki Fujita, "Self-Alignment Fabrication Technique Surface-Micromachined Optical Switches to Bulk-Micromachined V-Grooves," Trans. IEE Japan, vol. 119-E, No. 2 (1999) pp.108-112.

トップ   新規 一覧 単語検索 最終更新   ヘルプ   最終更新のRSS